Operating Instructions
Turn on:
Press the right and left buttons at the same time
and hold them down for one second. Then immediately press
and release the left button. When the light is turn on it will
be in the white light mode at 100% brightness.
Turn off
:
Press the right and left buttons at the same time
and hold them down for two seconds.
Switch mode
: (White/Red/Blue/Red+Blue)
When the light is on: Press and immediately release the left
button.( White-Red-Blue-Red+Blue-White)
Adjust brightness
:(White)
When the white light is on: Press and immediately release the
right button.( 100%-75%-50%-25%-100%)
Adjust brightness
:(Red)
When the red light is on: Press and immediately release the
right button.( 100%-50%-25%-100%)
Adjust brightness
:(Blue)
When the blue light is on: Press and immediately release the
right button.( 100%-50%-25%-100%)
Adjust brightness
:(Red+Blue)
When the Red+Blue light is on: Press and immediately release
the right button.( 100%-50%-25%-100%)
Flashing signal mode
:(White)
Turn on: When the light is off, press the right and left buttons
at the same time and hold them down for two seconds.
Turn off : When the light is off, press the right and left
Strobe mode
: (White/Red/Blue)
When the light is on, Press the right button and hold it down
for 1.5 seconds the Strobe mode will be on and the focus
light will be the previous color with a low power. When the
strobe mode is on, press the right button and hold it down
for 1.5 seconds the Strobe mode will be off and the light will
be back to the previous mode.
Switch mode
: (White/Red/Blue) (Strobe mode)
When the light is on: Press and immediately release the left
button.( White-Red-Blue-White)
Adjust brightness
:(White) (Strobe mode)
When the white light is on: Press and immediately release the
right button.( 100%-50%-25%-0%-100%)
Adjust brightness
:(Red) (Strobe mode)
When the red light is on: Press and immediately release the
right button.( 100%-50%-0%-100%)
Adjust brightness
:(Blue) (Strobe mode)
When the blue light is on: Press and immediately release the
right button.( 100%-0%-100%)
3000 lumens White /10W Red /18W blue
100°
Approx. 50 minutes (100% White)
White / Red / blue
100% / 75% / 50% / 25%
100% / 50% / 25%
100% / 50% / 25%
3*18650 wrapped to single cell
5000K （White)
100m / 330ft
505g on land 255g under water
56(D) x 137(L)mm
Features
Standard Accessories
□ Focus Light □ Batter y □ Charger □ Spare O-rings
□ User Manual □ O-ring Remover
① Right Button ② Left Button
③Batter y Level Indicator LED
④ Light Head ⑤Tail ⑥ Flood Beam LED
⑦Red Beam LEDs ⑧Blu-ray LED ⑨ Strobe por t
⑩Remote por t
The remote control is an optional accessor y
Automatic Protection Against Overheating
When the light is used in areas in which the ambient
temperature is higher than 50 °C, the light will
automatically reduce the brightness to 20%, this will
reduce heat and protect the light components from
damage.
Safety Mode
When the batter y is almost excharged, the light output drops
automatically to 20% the light turns off after enters Safety
Mode in approximately 10 minutes. Unable to switch the mode
and adjust the brightness.
Batter y Level Indicator
There are four colors to indicate the amount of power
remaining in the batter y and the function modes.
Blue approx. 100%~80%
green approx. 80~30%
Red approx. 30~10%
Single Blinking Red approx. 10~0%
Triple Dual Blinking The Current mode is Strobe Mode
Brightness：
Beam Angle：
Burn Time：
Modes:
White Power Level:
Red Power Level:
blue Power Level:
Batter y：
Color Temperature：
Depth Rated：
Weight：
Dimension：
Specifications
⑤
⑦
⑧
⑥
④
⑨
⑩
