5
/
5
“Baby step Z” decrease the gap will decrease. The value100means 0.1mm.In the printi
ng
process, you can use “pause” to pause your printing.
（
2
）
After the printing process finished, the nozzle get to origin. You can take off the model
with the platform.
4.
Software Introduction
1.
Installation
Get the Software installation package from SD card
，
follow the default steps to install
Wiibuilder on your PC.
2.
Slice Your Model File
Pull your model into the software and you can start to slice the model, save the sliced file into
SD card, then put the SD card into printer and start to print.
3.
There are also some advanced function in the software for professional using.
5.
Tips
(1)
Do not use printer for a long time
If you do not use printer for a long time, please make the filament stored in a confined
space.
(2)
Printing bigger model (To avoid edge warping)
We recommend you use high temperature glue stick, before you print, you can paint the
high temperature glue stick on the platform.
