1
1.Application Notices
1.1. About the User Manual
This User Manual contains important information on the installation, use, maintenance and other questions frequently raised up
about the 3D printer. Please read this user guide carefully before using this 3D printer. For damages to the 3D printer and other
losses caused by the violation of safety precautions and operational processes given in this User Guide, the user should take all the
responsibilities.
1.2. Safety Precautions
1) Please use the machine under room temperature.The printing temperature of the nozzle should not exceed 230 C. When the
machine is working normally or just finished, do not touch heating parts such as motor, nozzle, etc. to avoid scalding. Children
should use it under the care of their parents.
2) The structure of this 3D printer is very complex; please refer to this user guide for troubleshooting. If the problem still cannot
be solved, please contact our after-sale service. Our company will not offer warranty for printers with unauthorized repair by
the user.
3) There is high voltage within the 3D printer and it is prohibited for non-professionals to disassemble the printer. All the
consequences for violation of this precaution should be the responsibility of the user.
4) Please use the power cord and the USB data cable supplied by our company. For printer failure and other consequences
because of using the third-party power cable or USB data cable, the user should take all the responsibilities.
5) When the 3D printer is connected to the power, please plug the power cord into three-hole flat socket complying with the
international standard. The power cord cannot be forced into a two-hole socket. The ground wire must be connected to the
ground and shall not be suspended. Our company will not be responsible for mechanical failure or other accidents caused by
the disconnection of the ground wire.
Содержание TINA 2
Страница 14: ...12...
Страница 29: ...27...
Страница 34: ...32 4 Slicing setting...
Страница 41: ...39 Facebook Instagram Twitter...