Weed Eater WET1338B Скачать руководство пользователя | Manualshive

Страница: 17 / 48

background image

17

MAINTENANCE

FIG. 13

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent
engine dam age from overheating. Clean with a wire brush
or compressed air to re move dirt and stubborn dried gum
fi bers.

FIG. 12

AIR CLEANER COVER

SCREWS

GASKETS

BREATH ER
TUBE

CAR BU RE TOR
TUBE

MUFFLER

SPARK
PLUG

CYLINDER
HEAD
COVER

COOLING FINS

SCREW

SCREW

BLOWER
HOUSING

ENGINE COOLING FINS (See Fig. 12)

Remove any dust, dirt or oil from engine cooling fi ns to
prevent engine damage from overheating. Hood and
engine blower housing must be removed to clean engine
cooling fi ns.
• Remove hood (See “TO REMOVE HOOD AND GRILL

ASSEMBLY” in the Ser vice and Adjustments sec tion
of this manual).

• Remove screws securing air cleaner body and re move.

(Cover carburetor opening to prevent entry of dirt).

• Remove oil fi ll dipstick and cover opening to prevent

entry of dirt.

• Remove screws from blower housing and lift housing

off engine.

• Use compressed air or stiff bristle brush to thoroughly

clean engine cooling fi ns.

• To reassemble, reverse above procedure.
• Be certain carburetor tube, breather tube and gaskets

are in place.

AIR FILTER (See Fig. 13)

Your engine will not run properly using a dirty air fi lter.
Remove cartridge every 25 hours of operation and tap to
clean. Replace paper car tridge once a year or after every
100 hours of operation, more often if used in very dusty,
dirty conditions.
•      Remove knobs and cover.
•     Remove foam pre-cleaner element by sliding it off of

the paper cartridge.

NOTE:

Do not attempt to clean or oil the paper cartridge.

Replace paper cartridge once a year or after every 100
hours of operation; more often if used in very dusty or dirty
conditions.
•      Wash foam pre-cleaner in liquid detergent and water.
•      Wrap foam pre-cleaner in cloth and squeeze dry.
•     Lightly coat foam pre-cleaner with clean engine oil.

Squeeze in towel to remove excess oil. Do not sat-
u rate.

• Install foam pre-cleaner over paper cartridge.
• Reassemble cover and tighten knobs securely.

COVER KNOBS

OIL DRAIN PLUG

AIR SCREEN

OIL FILL CAP/DIPSTICK

AIR
CLEANER
BODY

FOAM
PRE-CLEAN ER

CARTRIDGE

AIR
CLEANER
COVER

«
...
15
16
17
18
19
...
»

Содержание WET1338B

















































Отзывы:

Нет отзывов

Похожие инструкции для WET1338B

Бренд: Cadet Страницы: 40

Бренд: Gravely Страницы: 52

Бренд: Worldlawn Страницы: 16

Бренд: McCulloch Страницы: 10

GLM 40/124 P EASY

Бренд: F.F. Group Страницы: 128

Бренд: Baroness Страницы: 87

Sweep It 23630YW

Бренд: Yardwise Страницы: 8

Бренд: Snapper Страницы: 28

Бренд: Bad Boy Страницы: 48

Бренд: Wards Garden Mark Страницы: 12

Бренд: Cub Cadet Страницы: 40

Бренд: Echo Страницы: 290

Бренд: Poulan Pro Страницы: 48

Бренд: Texas Equipment Страницы: 17

Бренд: Texas Equipment Страницы: 20

Бренд: inventiv Страницы: 64

Бренд: Kärcher Страницы: 6

Бренд: Wolf Garten Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды