6
USING YOUR UNIT
KNOW YOUR ELECTRIC BLOWER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT.
Compare the illustrations to your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Top Handle
Air Vents
ON/OFF
Switch
Blower Tube
Cord
Retainer
Tube Release Button
ON/OFF SWITCH
The
ON/OFF SWITCH
is used to activate
the motor.
BLOWER TUBE
The
BLOWER TUBE
is designed to direct
the flow of air.
TUBE RELEASE BUTTON
The
TUBE RELEASE BUTTON
secures the
blower tube or elbow tube to the blower
unit during operation. Also, pressing the
tube release button allows removal of the
blower tube or elbow tube.
STOPPING YOUR UNIT
To stop the unit, move the
ON/OFF
switch to the
OFF (0)
position.
STARTING YOUR UNIT
Move the
ON/OFF
switch to the
ON (I)
position to turn on the unit.
WARNING:
Do not use the unit
without the blower tube properly attached
to avoid flying debris and/or impeller con-
tact which can cause serious injury. Al-
ways wear eye protection to prevent rocks
or debris from being blown or ricocheting
into the eyes and face which can result in
blindness or serious injury.
OPERATING POSITION
BLOWER
Eye Protection
WARNING:
Inspect the area be-
fore using the unit. Remove all debris
and hard objects such as rocks, glass,
wire, etc., that can ricochet, be thrown,
or otherwise cause injury or damage
during operation.
Use your unit as a blower for:
D
Sweeping debris or grass clippings from
driveways, sidewalks, patios, etc.
D
Blowing grass clippings, straw, or
leaves into piles, or removing debris
from corners, around joints, or between
bricks.
Direct air flow by directing the blower
tube down or to one side. Always work
away from solid objects such as walks,
large stones, vehicles, and fences.
Clean corners by starting in corners and
moving outward. This will help prevent
an accumulation of debris which could
fly into your face.
Be careful when working near plants.
The force of the air could damage
tender plants.
