4
S
This unit is double insulated. See the
DOUBLE INSULATION CONSTRUCTION
section. Have all internal service per-
formed by qualified service repair per-
sonnel to avoid creating a hazard or
voiding your warranty.
S
Have all maintenance other than the
recommended procedures described in
the instruction manual performed by
your authorized service dealer.
S
Always see your authorized service
dealer to replace a damaged impeller.
Parts that are chipped, cracked, broken,
or damaged in any other way can fly
apart and cause serious injury. Replace
damaged parts before using the unit.
S
Never place any object in the air intake
opening as this could restrict proper air
flow and cause damage to the unit.
S
Never douse the unit with water or other
liquids or squirt with a water hose. Clean
the unit using a damp cloth. Wipe off
with a clean dry cloth. See
MAINTE-
NANCE
.
S
Check air intake openings and tube fre-
quently, always with the unit stopped
and power source disconnected. Keep
vents and tube free of debris which can
accumulate and restrict proper air flow.
S
Do not burn, incinerate, or expose this
unit to extreme heat.
S
Store the unit unplugged in a high, cool,
dry, indoor area out of the reach of chil-
dren.
S
Use only recommended attachments
and replacement parts to avoid creating
a hazard and/or voiding warranty.
S
Maintain the unit according to recom-
mended procedures.
BLOWER SAFETY
S
Use only in daylight or in good artificial
light.
S
Inspect the area before using the unit.
Remove all debris and hard objects
such as rocks, glass, wire, etc., that can
ricochet, be thrown, or otherwise cause
injury or damage during operation.
S
Never run the unit without the proper
equipment attached. When using the
blower, always install blower tube. Use
only recommended attachments.
S
To avoid spreading fire, do not use blow-
er near leaf or brush fires, fireplaces,
barbecue pits, ashtrays, etc.
S
Never place objects inside the blower
tube; always direct the blowing debris
away from people, animals, glass, and
solid objects such as trees, automo-
biles, walls, etc. The force of air can
cause rocks, dirt, or sticks to be thrown
or to ricochet which can hurt people or
animals, break glass, or cause other
damage.
S
Never use for spreading chemicals, fer-
tilizers, or any other substances which
may contain toxic materials.
STANDARDS
This product is listed by Underwriters Lab-
oratories, Inc., in accordance with UL
Standard 1017.
If situations occur which are not covered
in this manual, use care and good judg-
ment. If you need assistance, contact
your authorized service dealer or call
1--800--554--6723. Failure to follow all
Safety Rules and Precautions can result
in serious injury.
SAVE THESE INSTRUCTIONS
ASSEMBLY
WARNING:
If received assembled,
ensure your unit is properly assembled
and all fasteners are secure.
ATTACHING THE BLOWER TUBE
1. Align the grooves on the blower tube
with the grooves on the blower outlet.
2. Push the blower tube onto the blower
outlet until it snaps into place (tube is
secured by yellow tube release but-
ton).
3. To remove the blower tube, press the
tube release button while pulling on
tube.
Blower Tube
Blower outlet
Tube Release Button
