7
SERVICE AND ADJUSTMENTS
BLADE MAINTENANCE
WARNING:
The blade will spin mo-
mentarily after the motor stops. Make
sure blade has stopped turning and
disconnect unit from the power source
before performing work on the blade.
CAUTION:
Wear protective gloves
when handling or performing mainte-
nance on blade to help avoid injury.
S
Use the proper replacement blade.
Contact your dealer for a replace-
ment blade.
S
The blade is reversible. When the
cutting edge on one side becomes
worn, turn the blade over.
S
Check blade for flatness periodically.
Lay the blade on a flat surface and
inspect the blade for flatness. Throw
away a blade that is not flat.
WARNING:
Always replace a blade
that is bent, warped, cracked, broken,
or damaged in any other way. Never
attempt to straighten and reuse a dam-
aged blade. Use only the specified re-
placement blade.
To reverse or replace blade:
S
Disconnect unit from power source.
S
Fit a wrench onto the shaft behind
the blade.
S
Using another wrench, remove hex
nut by turning clockwise.
S
Remove cupped washer and spring
washer.
S
Remove the blade.
S
Clean all parts and check for dam-
age. Replace damaged parts.
S
Reverse or replace blade. Reinstall
blade onto shaft.
S
Install the spring washer, making
sure the outer, notched edge con-
tacts the blade.
S
Install the cup washer, making sure
the lip of the washer is facing toward
the spring washer.
S
Install the hex nut by turning counter-
clockwise; tighten securely.
Blade
Spring
Washer
Hex
Nut
Loosen
Tighten
Cup Washer
STORAGE
Prepare unit for storage at the end of
the season or if it will not be used for
30 days or more.
WARNING:
S
Secure the unit before storing or
transporting.
S
Store unit with all guards in place.
Position unit so that any sharp object
cannot accidentally cause injury.
S
Store unit well out of reach of children.
EDGER STORAGE
S
Clean the entire unit.
S
Inspect the blade area and clean any
dirt, grass, leaves, or debris that has
collected. Inspect the blade and
blade guard; replace a blade that is
bent, warped, cracked, broken, or
damaged in any other way.
S
Replace a damaged or worn blade
guard.
S
Lightly oil external metal surfaces.
CAUTION: Wear protective gloves
when handling the blade. The blade is
sharp and can cut you even when it is
not moving.
S
Apply a coating of oil to entire surface
of blade; wrap it in heavy paper or
cloth.
S
Be sure all handles and guards are
in place and are securely fastened.
Replace any damaged parts.
S
Check entire unit for loose screws,
nuts, and bolts. Replace any dam-
aged, worn, or broken parts.
S
Do not cover with plastic. Plastic can-
not breathe and will induce condensa-
tion and eventual rust or corrosion.
