Wedge Clamp Systems Inc. EZE ROLLER, Руководство по сборке

Страница: 5 / 11

4
EZE ROLLER ASSEMBLY INSTRUCTIONS
•
Fit the ringed bearing and the bearing
into the hole in the crank mount bracket from
the inside of the bracket. As seen in the picture
the bearing faces should be flush to the outside
face of the bracket.
• Insert the crank handle into the crank
mount bracket as shown.
•
Place the two crank handle washers on
the slotted crank shaft on either side of the
black strap.
•
Be sure to mount the washers so that
the bevel flanges on the washers angle AWAY
from the strap.
•
Install the split pin into the crank shaft pin hole.
•
The pin goes between the outer crank handle washer and the ringed
bearing as shown.
PIN
BEARING
BEARING
CRANK
HANDLE
WASHERS
PIN HOLES
CRANK HANDLE
RIGHT
CHANNEL
CRANK
MOUNT
RINGED
BEARING
STRAP
7.
8.