LX3V-ETH-BD
1
FUZHOU FU CHANG WECON ELECTRONICS TECHNOLOGY CO., LTD.
1. The installation instructions
Before the installation make sure that the PLC host and the equipment connected to bd board have
been powered off. Please install the BD module in the corresponding position of the PLC, and lock the four
standard screws. In case of the dust interference, please cover BD right part by PLC’s cover.
Note:
1) Install the board firmly on the PLC. Poor contact may cause malfunction.
2) The suggested tightening torque is 0.3-0.6 N.m.
Warning:
1) Disconnect the power supply before installing/removing the board and wiring in case of electric
shock or product damage.
2) The After completing the installation and wiring, do not replace the PLC top cover before turning
on the power.
Supported version:
LX3VP
：
25103 , 16050;LX3VE
：
25201, 16050.
LX3VP
：
25105
、
16000 or higher version
，
LX3VE
：
25203, 16000 or higher version.
2. Key Features
1) Maximum number of connections 8, regardless of master and slave.
2) The current protocol only supports: MODBUS-TCP.
3. The shape and terminal description
1) The case of one BD board
2) The case of two BD board
