Wecon LX3V-2ADV-BD, Руководство пользователя

Страница: 5 / 7

LX3V-2ADV-BD
4
WECON Technology Co., Ltd.
Max tighten torque of terminal is 0.5 to 0.6N.m.
Table 5-1
Line type
Cross sectional
area(mm
2
)
End-of-pipe treatment
AWG26 0.1288 Stranded cable: stripped jacket, rub
Conductor, then connect the cable.
Single-core cable: stripped jacket,
Then connect the cable.
...... ......
AWG16 1.309
5.2 Input mode
Figure 5-1
6. Example
The input analog of all channels
（
-10V~10V
）
is stored inside the data memory
（
D8112, D8113
）
in
the form of data. Values will be automatically stored when the “END” order is sent out. The value is
calculated by the designated analog data conversion characteristics of the special auxiliary relays
M8112 and M8113.
6.1 Basic Program Examples
Notes:
1) Start M8112 and M8113; designate the analog data conversion characteristics of CH1 and CH2.
2) After execution of analog data conversion, do not change the values of D8112 or D8113
through operator program, programming tools or graphic operating terminal.
The following program can set CH1 and CH2 into voltage input mode. After ADV conversion, values
of all channels are stored into D0 and D2.