S1 MICRO-SWITCH
SA TEMPERATURE LIMITER
EH ELECTRIC HEATING TUBE
HL1 POWER INDICATOR
HL2 HEATING INDICATOR
E EARTH GROUND
SB TEMPERATURE CONTROLLER
NOTE:
THE CIRCUITS FOR THE GF SERIES 1-TANK/2-TANK ELECTRIC
FRYER ARE DIFFERENT. THE DIFFERENCE IS THAT 2-TANK ELECTRIC
FRYER HAS TWO TANKS AND TWO ELECTRIC BOXES AND TWO
SEPARATE TEMPERATURE CONTROLLERS.
E. Instruction
1. Check that the power supply is correct, and make sure the supplied
voltage is coordinated with the voltage required by the unit.
2. There is an oil level mark in the oil tank.
During use the quantity
of oil in the oil tank should be kept between the “MAX” and
“MIN” levels.
3. 1) Plug the machine and switch on the power. The green indicator
illuminates. This shows that current has been supplied to the
machine.
2) Rotate the temperature controller clockwise, until the required
temperature is set. At that time, the yellow indicator illuminates