Webster MultiPort/LT, Руководство пользователя

Страница: 84 / 114

MultiPort/LT User Reference Page 72
Chapter 3
3.3.3.6. l - LANCE Statistics
The LANCE is the Local Area Network Controller - Ethernet, and is responsible
for most of the Ethernet protocol handling. This command gives the statistics
for this chip. Refer to AMD's data books for more details. The statistics are:
XMT BLOCK Transmit currently blocked - no free buffers
babl LANCE has been babbling
miss LANCE ran out of receive buffers
merr Bus error while LANCE bus master
recvd Total count of received packets
good Good packet count
sync Start of Packet bit not set
long Packet too long - longer than 1600 bytes
frame Packet framing error
oflo LANCE FIFO overflowed - excess bus contention
crc CRC error on packet
buff Lance buffer overflowed before next status read
nbuff Buffer allocation failure - none available
xmtd Total count of transmitted packets
collisions Total collision packet count
multi Multiple (>1) collisions
hard Hard collisions - too many retries
lcol Late Collisions - possibly cable too long
uflo LANCE buffer underflowed - excess bus contention
buf LANCE buffer error
defers Packet deferred - Ethernet was busy
A typical "l" report:
babl 0, miss 0, merr 0
recvd 851796: good 851796, sync 0, long 0, frame 0,
oflo 0, crc 0, buff 0, nbuff 0
xmtd 894829: collisions 105 (multi 50 hard 0)
lcol 0, uflo 13, buf 0, defers 5164
Note that as with the "s" statistics, collisions and defers are to be expected,
although an excess of either might indicate general networking problems.
Excess crc errors could also mean network problems.
3.3.3.7. M - NBP Statistics
A typical printout from the NBP statistics is shown below:
NBP: 13503 pkts rcvd;