DRIVE REACH OTR FLEET
CELL SIGNAL BOOSTER
9
______
Step 6:
Connect Coax Cables
To Booster
Connect the cable from the Outside Antenna to the port
labeled “Outside Antenna” on the Drive Reach booster.
Connect the cable from the In-Vehicle Antenna to the port
labeled “Inside Antenna” on the booster.
from Outside Antenna
from Inside Antenna
NOTE: Bracket can be used to fasten booster in a specific location if desired.
The Velcro® strip on the bottom of the bracket can also be used to keep
booster from sliding around.
bracket
Drive Reach
BU-GDE000264-001-030220.indd 9
BU-GDE000264-001-030220.indd 9
3/2/2020 10:41:53 AM
3/2/2020 10:41:53 AM