weBoost 460066 Скачать руководство пользователя страница 10

8

FIXING RED LIGHT ISSUES

This involves Solid Red & Blinking Green/Red lights.

■   Tighten all cable connections (be sure to handtighten only, do NOT use tools) .
  You may want to undo and redo the connection completely . Unplug and replug
  in Power Supply .
■   Increase the distance (horizontally or vertically) between the Outside and Inside
  Antennas . Add included cable if needed . Unplug and replug in Power Supply .

FIXING ANY YELLOW LIGHT ISSUES

This involves Solid Yellow & Blinking Green/Yellow lights.

■   

Outside Antenna must be adjusted.

 Disconnect and reconnect power between 

adjustments . Wait at least 10 seconds between adjustments for the lights to reset .  

Pole Mount Option:

 Rotate the Outside Antenna away from the strongest cellular 

signal in small increments (1/8 turn) until the light turns green . Unplug and replug in 

Power Supply . 

Mounting On Side Of Roof Option:

 Change mount location . Move the 

Outside Antenna to location of the home/building to see if the lights turn green . Unplug 

and replug in Power Supply . Then secure in place .

Troubleshooting

Содержание 460066





















Отзывы: