Grounding Terminal
Power Connector
Reset Button
RS485 Port 1
SD card
USB OTG Port
RS485 Port 2
LAN Port
USB Port 3
USB Ports 1, 2
Fig. 3
Fig. 4
C.
Other
9.
Verify that the SD card is correctly installed and is intended for
this particular device.
10.
Network defaults: IP address: 192.168.1.99/24. Webserver
running on port 443/80. Username: admin, password: admin.
11.
The reset button may be pressed only if the RUN LED is blinking.
By pressing the reset button the device reboots with network
configuration set back to defaults (see 10.) Other parameters are
not affected.
12.
USB OTG is running on fixed IP address 22.22.22.22 with netmask
255.255.255.252. RNDIS driver is needed on Windows, and then
the network interface can be configured with IP 22.22.22.21 to
connect to the device.
