6.3.4. Setting sensor input
Set a sensor type.
(1)
Run “WebEye 2 CofigStation Tool”
(2)
Log in the WebEye 2.0, and click “Event
Æ
Source
Æ
Input” menu.
(3)
Possible to set sensor by sensor. When setting as same value, use “Global” menu and click the
“Apply” button.
(4)
Press the “Apply” button after setting.
<Note>
NO : Normal Open Type (It means circuit is disconnected at normal case.)
NC : Normal Close Type ((It means circuit is connected at normal case)
29
