WebGate HS1620F-D, Руководство пользователя

Страница: 59 / 99

58
EVENT SOURCES
Check Sensor, Motion detection, Text or systems for activating event
System event sources of HDD Fail, RAID fail, fan fail, password fail,
WRS registration fail and power on can be checked (some or all)
E-mail Configuration
Recipient Address
Input E-mail address with receiver’s E-mail info.
E-mail format should be xxxx@xxxxxx.xxx and the users must only
use combination of numbers and the English letters
Sender’s E-mail address
Sender’s E-mail address is set when user use E-mail for output
selection and user setup E-mail address as xxxx@xxxxxx.xxx.
Picture attachment
When sensor, motion detector and video loss occur, relevant event info
with channel video will be sent to an e-mail. Only system event info
will be sent for system event.
Authentification
There are a few ways to send email (No authentification, SMTP server authentification and TLS authentification.)
• No authentification: sends email to the recipient address without server authentification
• SMTP authentification: sends email to the recipient after SMTP server authentification. The recipient address
must support SMTP authentification
• TLS authentification : sends email to the recipient after TLS server authentification.
FTP Configuration
The DVR sends 1 video image per event to a FTP server when an
event occurs.
<Note>
Since FTP just transmits an image, if there is no image system event, it is
not supported.
Server IP/URL
Enter the FTP server address to send image