5
Caution when Connecting Power
If the DVR does not support PoC function, then the power
must be provided separately. DC12V is required.
When the user uses different power, the camera can seriously
be damaged.
How to upgrade F/W by using CoC(RS485)
1. Connect WEBGATE DVR with camera.
2. Run [HD-SDI Camera Network Upgrader] and select [CoC] on [Serial Port].
- PC and DVR must be connected through network.
3. Select the desired camera’s channel, then write down that DVR’s IP address.
- HD camera upgrade program and F/W can be downloaded from the website.
(http://www.webgateinc.com/)
4. Insert DVR’s Port, User ID, Password and press “Connect” to log-in to the DVR.
5. Select [ON] in Camera OSD Control, then press E,L,R,U,D buttons to check camera’s
OSD control.
- When OSD control is not available, check DVR and camera’s configuration.
6. Select the F/W and press “Load” to upgrade the camera. The camera will reboot.
- Images will be stopped until the boot is complete.
7. When the upgrade is finished, the DVR and CMS (Control CenteR) can be used to
remotely change the camera’s settings.
Cable Type
Distance
Details
5C2V
Approx.
90M
Analogue cable
4C-FB(T), 4C-HFB(T), RG59
Approx.
140M
High-expansion foam cable,recommends
double(or triple) shielded cable
5C-FB(T), 5C-HFB(T), L-6CHD, RG6
Approx.
180M
Customized HD-SDI cable
