Quick Guide
Installation, Commissioning, Maintenance
Markoprint HandHold
Copyright ©, Weber Marking Systems GmbH
Software Version 2.020f
Date: 10. Oktober 2016
Version 1
Weber Marking Systems GmbH
Art.Nr: 40042200
Maarweg 33
D-53619 Rheinbreitbach
E-Mail: [email protected]
http://www.webermarking.de
Overview
1.
Battery
2.
Battery charger 230 V AC
3.
USB Stick
Place for 2 Ink cartridges
4.
HandHold
5.
Quickguide
1.
User interface with USB
Slot and cartridges holder
2.
Print area
3.
Encoder for speed detection
4.
Switch On/Off
5.
Battery slot
User interface
Commissioning
1. Insert the battery on the bottom side of the X1 HandHold
2. Insert a cartridge on the top side of the X1 Handhold
3. Push the red button on the HandHold to start the system and wait
until the system is online.
4. Select a print image by using the selection buttons.
5. Place the X1 HandHold on the surface to be printed and move it
from left to right.
Store Ink Cartridges
If ink cartridges are not used for an extended period of time, they must
be stored in a cartridge clip (CartClip) to prevent the ink in the nozzles
from drying out.
To do this, the ink cartridges must be removed from the controller.
Before inserting, gently wipe the nozzle plate of the cartridge with an
absorbent, lint-free wipe cloth.
Loading Print Image
Requirements
The used USB stick was connected for a „Initialisation“ to
the HandHold print system.
The print image, created with the iDesign Software, is
transferred to the USB stick.
Instruction
1. Connect the USB-Stick to the USB-socket on the top side of
the print system
2. Wait until the data exchange is completed. The STATUS
LED flashes during the data exchange and lights constant
after finishing.
3. Remove the USB-Stick from the print system (2 seconds
after the LED flashes constantly).
Overview of iDesign to create a print image