manualshive.com logo in svg

Weber SP 200 LP, Руководство пользователя

Поделиться
Скачать
Weber SP 200 LP Скачать руководство пользователя страница 15

15

Step 12

Set LP fuel scale

You will need:  LP tank (empty).

Note - For accuracy, the fuel scale must be set with an
empty tank.

We utilize various LP tank manufacturers. Some of the
tanks we receive have differing top collar assemblies.
(The top collar is the metal protective ring around the
valve.) One series of tanks mounts with the valve facing
the front. The other tanks mount with the valve facing
away from the fuel scale. These types of tanks are
illustrated in Figure 13.

Loosen the tank lock wing nut. Tighten so the lock is
held up out of the way. Figure 13 (a). Lift and hook the
tank onto the fuel scale. With an empty LP tank, adjust
the fuel scale setting to E by turning the scale setting
(top) wing nut. Figure 13 (b).

CAUTION:  Do not remove adjustment wing nut from
the tank scale.

After adjusting tank scale, push tank down a couple of
times to check that the tank scale is set on “E”.

F

E

F

E

F

E

Figure 13

Tank lock
wing nut

(a)

(b)

Scale setting
wing nut

Step 13

Fill LP tank

Note - The LP tank manufacturer is responsible for the
materials, workmanship and performance of the tank. If
the tank has a defect, malfunctions, or you have a
question regarding the tank, call the tank manufacturer's
customer service center. The phone number is on the
warning decal which is permanently attached to the
tank. If the tank manufacturer has not resolved the issue
to your satisfaction, then call Weber-Stephen Products
Co., Customer Service Center.

Take the LP tank to an RV center (or some other source
of LP gas) to fill the tank with 20 pounds of liquid
propane.

WARNING:  We recommend that your LP tank be
filled at an authorized LP gas dealer by a qualified
attendant, who fills the tank by weight.

IMPROPER FILLING IS DANGEROUS.

Tell your LP dealer that this is a new LP tank. The air
must be removed from a new LP tank before the initial
filling. Your LP tank dealer is equipped to do this.

CAUTION:  If you exchange your LP tank, make sure
you get a similar tank in return. Your LP tank is
equipped with a quick-disconnect valve. Other LP
tanks are not compatible with your barbecue
connection.

The LP tank must be installed, transported and stored in
an upright position. LP tank should not be dropped or
handled roughly.

Never store or transport the LP tank where
temperatures can reach 125° Fahrenheit (too hot to hold
by hand – for example: do not leave the LP tank in a car
on a hot day).

For full instructions on safe handling of LP tanks, see
section "Operating Instructions".

Содержание SP 200 LP





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды