background image

5

Contents

WARNINGS ................................................................ 2
Warranty & Patents.................................................. 3-4
General Instructions.................................................... 6
Assembly ............................................................... 7-21

Operating Instructions

Lighting........................................................ 22-23
Cooking ............................................................ 24
Storage and/or Nonuse .................................... 24
Cleaning .......................................................... 24

Troubleshooting & Maintenance

Annual Maintenance......................................... 25
General Maintenance.................................. 26-28
Troubleshooting................................................ 29

Parts Listing .............................................................. 31

FEATURES:

a) Convenient tables and racks.

b) Heavy gauge porcelain-on-steel lid seals in heat.

c)

Rapid read thermometer for precision cooking
measures grill temperature, and can be removed and
inserted into the food.

d) Heavy gauge steel Flavorizer Bars distribute heat

within the grill. Flavorizer Bars heat just the right
amount of drippings for flavoring, letting excess fat
drip past to help prevent flare-ups.

e) Weber Warm-Up Basket for additional cooking or

warming space.

f)

Separate burners for temperature control.

g) Crossover Ignition System with Gas Catcher Ignition

Chamber.

h) Catch pan catches excess grease.

i)

Locking casters for additional portability.

a

b

c

d

f

g

a

h

e

i

Содержание SKYLINE 1200

































Отзывы: