103160_SHB_Rev2.1_080611
MPE 750 Turbo Marine
Closed Loop
Service Manual
Page 9
Always check the oil level and coolant level before driving.
See Chapter
Oil level check
.
See Chapter
Coolant level check
.
4.1
Maintenance work by the user of the vehicle
Underrunning and exceeding the motor oil and
coolant fill levels specified in this manual can
cause damage to the engine.
ATTENTION
Regular checks before driving
In order to protect the sea water cooling circuit against soiling, calcium deposits and such,
the sea water cooling circuit must be flushed after each use.
Flush sea water cooling circuit after driving
Soiling in the sea water cooling circuit can cause
severe damage to the exhaust manifold.
The flushing is done with a flush kit in the vehicle. See the vehicle manufacturer‘s service
manual.
1.
Connect the Flush kit.
2.
Start engine and operate only in idle. Do not accelerate.
3.
Ensure the water supply within 30 seconds. See Chapter Operating the engine
without sea water.
4.
The Weber Automotive GmbH recommends to flush the sea water cooling circuit
for one minute minimum.
5.
Discontinue water supply.
6.
Stop engine within 30 seconds.
7.
Remove the flush kit.
Only flush engine while running, otherwise water
from the exhaust can enter engine and cause
damage.
ATTENTION
ATTENTION
