Weber Geset 111, Оригинальное руководство пользователя

Страница: 12 / 56

Chapter 2 Safety regulations
40001684 Geset 111
Version: 12.05.14
Page 12 of 56
GB
Intended use
The operational safety of the system Geset 111 is guaranteed only if it is used as
intended.
Intended use consists of the following …
¥
The labeling system may only be used for automatically labeling moving and
stationary products.
¥
The labeling system may only be worked on manually after it stops.

The labeling system is used for the specific products agreed with the customer with
the specific, agreed labels. In every way, the products and labels must satisfy the
documented* specifications agreed between the machine manufacturer and
customer.
* “Documented specifications“ are normally laid down in the LSS (Labeling-Systems-Survey) and this document
is handed out to the customer with the order confirmation.

the labeling system is operating in explosion-proof environments (not intended for
explosion-risk areas) !

the labeling system does not come in direct contact with food products.

the labeling system is not operating outdoors.

the labeling system is used with an additional pneumatic shutter at the aperture for
the tamp when operating in a wet environment.

the labeling system has additional air conditioning features in the stainless steel
cabinet for use in an aggressive air environment (e.g. salted air).

the labeling system has additional air conditioning features in the stainless steel
cabinet for use in a dusty environment with unadjusted particles.

the labeling system is used exclusively for industrial purposes.

all working conditions and instructions, prescribed in this manual, will be observed.

failures at the labeling system affecting the safety have to be reported and
immediately resolved by trained and briefed personnel.

maintenance is kept and performed correctly.

the labeling system is used exclusively under faultless conditions.

safety equipment is not by-passed or abrogated.

arbitrary changes at the machine are omitted.

the labeling system is used or operated by adequate personnel, refer to “Authorized
persons” (s. page 17).These persons must have read and have to be familiar with
the content of the manual.
Handling the labeling system without considering one of these points is not for the
intended purpose and can cause serious damages to persons or properties