manualshive.com logo in svg

Weber 42371, Руководство пользователя, Страница: 19 / 19

Поделиться
Скачать
Weber 42371 Скачать руководство пользователя страница 19

19

19

MAINTENANCE

Crossover

®

 Ignition System Operations

If the Crossover

®

 ignition system fails to ignite the LEFT 

burner in a burner set, light the LEFT burner with a match. 
If the LEFT burner lights with a match, then check the 
Crossover

®

 ignition system.

• 

Check that both ignition wires

(1,2)

 are attached prop-

erly.

• 

Check that the Crossover

®

 ignition button is activating.

• 

Replace battery with a like brand battery.

• 

You should hear the igniter sparking.

If the Crossover

®

 ignition system still fails to light, contact 

the Customer Service Representative in your region using 
the contact information sheet provided with your manual.

Replace Igniter Batteries

Parts required:  1 AA alkaline battery per igniter.

Unscrew igniter button from top of control panel. Remove 
igniter button and contact spring. Remove old battery and 
replace with a new AA alkaline battery. Positive end

(1)

 of 

battery faces up as shown in illustration. Replace spring 
contact

(2)

 and screw igniter button

(3)

 back down.

(1)

(2)

Содержание 42371




















Отзывы:

Нет отзывов