16
1
2
3
4
5
6
7
8
MS 25 & 35 (CR 6 MDM & CCD)
1 Operational status indicator
(LED)
This indicator signals that the ignition of the machine is
switched on. It comes on as soon as the key switch (5) is set
to position “1”.
2 Oil pressure indicator (LED)
This indicator warns of insufficient oil pressure.
Shut down the machine immediately when this indicator comes
on. The engine is switched off automatically.
3 Charge level indicator (LED)
This indicator comes on if the charging current supply to the
starter battery is insufficient. While operation of the machine
can resume, the cause of the insufficient charging current
supply must be identified and rectified.
4 Operating hours counter
This field shows the operating hours completed by the
machine.
The counter will show the remaining time until the next
scheduled maintenance for the first 10 seconds after the
ignition was switched on (key switch (5) in position “1”).
5 Temperature indicator (LED)
This indicator comes on if the engine is overheating.
Shut down the machine immediately when this indicator comes
on. The engine is shut down automatically 3 minutes after the
indicator comes on.
6 Air filter indicator (LED)
This indicator comes on in case of heavy fouling of the air filter.
Shut down the machine immediately when this indicator comes
on. The engine is shut down automatically 10 minutes after the
indicator comes on.
7 Maintenance indicator (LED)
This indicator comes on 10 operating hours before the next
scheduled maintenance interval.
Figure 3
