Weber mt 0116263, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 28

23
8.2.4. Check the hydraulic oil
level
Lock the guide bar in place in the transport position.
Check the hydraulic oil level.
The oil level is correct when the oil is in the middle of the
view glass.
8.2.5. Change the oil in the
exciter
Start the engine and allow the engine to warm up for a few
minutes.
Switch off the engine.
Tilt the machine slightly.
Place a suitable collection vessel under the machine.
Loosen the oil drain plug.
Allow the oil to drain.
Tilt the machine in the other direction.
Fill fresh oil into the exciter in accordance with the specification.
Close the oil drain plug.
Shut down the machine.
Remove the V-belt guard (1).
Check the V-belt (2) for cracks and wear.
Replace the V-belt if it shows signs of extensive wear or
other damage.
Fit the V-belt guard.
8.2.6. Check V-belt
1
2