Webee Wireless N Router with 3G Modem Support, Руководство пользователя, Страница: 28 / 91

USER MANUAL OF WEBEE WIRELESS N ROUTER
Version:1.1
Firmware Type 2
P/N: 60291092
28
Item Description
Enable WDS Click the check box to enable wireless distribution system. Refer to
4.21 What is Wireless Distribution System (WDS)?
MAC Address Fill in the MAC address of AP to register the wireless distribution
system access capability.
Data Rate Select the transmission data rate from pull-down menu. Data rate can
be auto-select, 1M to 54Mbps or MCS.
Comment Fill in the comment tag for the registered AP.
Apply Changes Click the Apply Changes button to register the AP to new
configuration setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
Set Security Click button to configure wireless security like WEP(64bits),
WEP(128bits), WPA(TKIP), WPA2(AES) or None
Show Statistics It shows the TX, RX packets, rate statistics
Delete Selected Click to delete the selected clients that will be removed from the
wireless distribution system.
Delete All Click to delete all the registered APs from the wireless distribution
system allowed list.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
WDS Security Setup
Requirement: Set [Wireless]->[Basic Settings]->[Mode]-
>AP+WDS
This page is used to configure the wireless security between APs. Refer to 3.3.6
Wireless Security Setup
.