Webdyn WebdynSunPM, Руководство пользователя

Страница: 17 / 168

17
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
The WebdynSunPM product can be damaged by electrostatic discharges (ESD)
Class 3 equipment: the device operates on safety extra-low voltage (SELV) (50V
maximum). The voltage reduction must be obtained using a safety transformer
providing safe galvanic isolation between primary and secondary.
This equipment is not suitable for use on premises that may host children.
Do not install the equipment near a heat source or at a height greater than 2m.
To clean the product, only use a slightly damp cloth to gently clean and wipe the
surfaces.
Never use aggressive chemical agents or solvents that could alter the plastic material
or corrode the metal parts.
It is essential to leave a 20 cm empty space around the antenna to optimise the
Modem cell sensitivity.
Regulation
The product is compliant with the European directives according to the EU declaration of
Conformity available from Webdyn or from the web site: www.webdyn.com
Recycling:
The nationally enacted European directives covering batteries and waste electric
and electronic equipment govern the actions required to limit the negative impact
of the end of product life.
These products are collected separately. Use an authorised battery collection and processing
centre or contact Webdyn.