WebDT 515A, Основное руководство по эксплуатации

Страница: 2 / 2

I/O Panels & Func ti on Bu tt ons
The WebDT Integrated LCD System has a comprehensive set of I/O ports. The following ports are
located along the lower rear edge of the display unit.
Side Panel Func ti on Bu tt ons
The side panel of the WebDT Integrated LCD System features power, and programmable bu tt ons.
Two USB 2.0 ports 1.
COM ports 2.
Audio-out jack 3.
Microphone-in jack 4.
Line-in jack 5.
Ethernet port (RJ45) 6.
18.5V/ 3.5A DC-in jack 7.
Two USB 2.0 ports 8.
Two USB 2.0 ports 1.
COM ports 2.
Audio-out jack 3.
Microphone-in jack 4.
Two USB 2.0 ports 5.
Ethernet port (RJ45) 6.
18.5V/ 3.5A DC-in jack 7.
WebDT Integrated LCD Systems
ENGLISH
2
3
ENGLISH
Packaging
The WebDT •
Integrated LCD System is packaged with recyclable materials and
designed for maximum protec ti on in transporta ti on and handling.
When possible, please save the packaging carton and protec ti ve inserts for •
re-use if there is ever a need to ship the WebDT Integrated LCD System.
Cleaning the an ti -microbial enclosure
(WebDT 517MD/ 522MD)
Use a so ft /non-abrasive cloth moistened with water to clean the enclosure. •
If using a cleaner, an alcohol-free and oxide-free cleaning liquid is recommended. •
To prevent scratching the an ti -microbial coa ti ng, please wipe gently. •
Bu tt on Descrip ti on
9. Programmable
The four bu tt ons are intended to be user programmable via so ft ware in
applicable opera ti ng systems.
10. Power
M • ay be con fi gured to perform di ff erent func ti ons, depending on the
so ft ware opera ti ng system.
D • epending on the OS, a brief, fi rm push will trigger so ft ware-enabled
entry into Shutdown or Standby modes. Push in similar manner to Restart or
to exit Standby mode.
P
• ush and hold for over 4 seconds to forcefully shut down the device. This
method of powering o ff should only be used when proper shutdown
through so ft ware is not possible.
Bu tt on Descrip ti on
8. Programmable
The three bu tt ons are intended to be user programmable via so ft ware in
applicable opera ti ng systems.
9. Power
M • ay be con fi gured to perform di ff erent func ti ons, depending on the
so ft ware opera ti ng system.
D
• epending on the OS, a brief, fi rm push will trigger so ft ware-enabled
entry into Shutdown or Standby modes. Push in similar manner to Restart or
to exit Standby mode.
P
• ush and hold for over 4 seconds to forcefully shut down the device. This
method of powering o ff should only be used when proper shutdown
through so ft ware is not possible.
1
1
2
2
3
3
4
4
5
5
7
7
8
9
8
9
10
6
6
WebDT 515/ 517/ 522
WebDT 515A/ 517A/ 522A/ 517MD/ 522MD
Op ti ons
The WebDT Integrated LCD System has a number of op ti onal con fi gura ti ons in both so ft ware and
hardware. These include:
SSD or HDD storage 1.
IR touch screen display 2.
Magne ti c card reader 3.
Presence sensor and scanner auto detec ti on 4.
Built-in 802.11a/b/g/n WLAN module 5.
Smart card reader; supports ISO 7816 T=0, T=1 6.
smart card, 3V/ 5V smart card and memory card