Webb WERR16, Руководство оператора и список запасных частей, Страница: 12 / 28

MAINTENANCE
IMPORTANT - Regular, careful maintenance is essential for keeping the safety level and original
performance of the machine unchanged over time.
1) Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular
maintenance is essential for safety and performance.
2) Never store the equipment with fuel in the tank inside a building where vapour may reach a flame, spark
or source of extreme heat.
3) Allow the engine to cool before storing in an enclosed space.
4) To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment and fuel storage area
free of grass, leaves, or excessive grease. Remove grass cuttings from containers before storage.
5) Do not use equipment with worn or damaged parts. Parts should be replaced not repaired. Only use
genuine spare parts. Parts that are not of the same quality can damage the equipment and create safety
hazards.
6) If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.
7) Wear strong work gloves when removing and reassembling the blade.
8) Check the blade’s balance after sharpening.
9) Check the self-closing guard and grass-catcher frequently for wear and deterioration.
10) Whenever the machine is to be handled, transported or tilted you must:
- Wear strong working gloves.
- Grasp the machine at the points that offer a safe grip, clear of the blade and taking account of the weight of
the machine and its distribution.
CLEANING
Carefully clean the machine after each cut to ensure an easy start-up next time you use the machine. Be
sure to remove grass debris and mud accumulated inside the chassis before it dries.

If you need to tilt the mower while cleaning always tip it backwards towards the handles, do not tip it on
its side as this will cause oil to enter the carburettor or exhaust.

The paintwork on the inside of the chassis may peel off over time due to the abrasive action of the cut
grass; when this occurs you must touch up the paintwork using a rustproof paint as soon as possible to
prevent the formation of rust that would lead to corrosion of the metal.

Remove the transmission casing by removing the screws and clean around the transmission and drive
belts with a brush or compressed air once or twice a year.

Once every season, the drive wheels should be cleaned internally. Remove both wheels. Clean the gear
wheel and the wheel gear rim of grass and dirt using a brush or compressed air.