Webb 1938175001 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

Webb 1938175001 Скачать руководство пользователя страница 16

BLADE MAINTENANCE

WARNING:

Blades are sharp. When handling the blade assembly, wear non-slip, heavy-duty protective

gloves. Do not place your naked hand or fingers on the blade or in any position where they

could get cut. NEVER touch the blades or service the unit when the engine is running.

SHARPENING

Never attempt to sharpen the blade yourself. The blade must remain balanced; an unbalanced

blade will cause excessive vibration through the machine. Always have a blade sharpened by a

professional garden machinery specialist.

Always check for any damage before each use and replace a damaged blade immediately, with

an approved replacement part.

CHANGE – (TWO PERSON OPERATION)

Disconnect the spark plug cap & remove the fuel and oil. Tilt the mower on its side with air filter

side uppermost. Firmly grip the blade with the gloved hand and remove the blade bolt, blade

washer, blade and blade housing.

Check all the components to ensure they are undamaged.

When refitting the blade, ensure the turned-up edges of the blade are turned up towards the

machine.

When replacing the blade, the blade bolt should also be replaced.

A damaged or unbalanced blade will cause excessive vibration and should be replaced

immediately.

AIR FILTER

Inspect the air filter each time the engine is operated. You will

need to clean the air filter more frequently if you operate the

engine in very dusty areas. Always replace with genuine

replacement parts.

NOTE: Operating the engine without an air cleaner, or with a

damaged air cleaner, will allow dirt to enter the engine, causing

rapid engine wear. This type of damage is not covered under the

Warranty

Remove the air filter cover lid & remove the foam filter

cartridge. Clean the cartridge in warm water containing a few

drops of washing-up liquid, until it is clean & free from all grease

& dust. Rinse the cartridge in clean water & gently squeeze to

remove water. Let it air dry naturally.

Clean the cover & inside of the air filter box with a clean lint-free

cloth. Apply a uniform layer of oil to the outside of the cartridge

filter with a brush (you can use clean engine oil). Insert the filter

cartridge into its housing and replace the filter lid, ensuring that

each component is properly installed.

INSTRUCTION MANUAL

«
...
14
15
16
17
18
...
»

Содержание 1938175001





























Отзывы:

Нет отзывов