REMOVE AND REPLACE THE BLADE.
Block the rotation of the blade, using a good sixed piece of wood, which the blade cannot cut.
Hold the blade using gardening gloves (not provided) and spanner wrench (not provided) rotating
the spanner anti-clockwise.
Remove the bolt, washer and blade. Dispose of the old blade responsibly.
Attach a new blade, fastening with the washer and blade bolt. Ensure that the blade is correctly
positioned on the blade boss and then firmly tighten the bolt, clockwise.
CLEANING
Always remove the electric plug from the mains supply, before any cleaning is undertaken.
Carefully clean the underside of the deck with a stiff brush after each cut; remove the grass debris
and mud accumulated inside the deck to prevent it drying. Remove the belt casing by removing the
screws and clean around the transmission and drive belts with a brush or compressed air once or
twice a year. Do not use water on any part of the main machine!
MAINTENANCE
IMPORTANT - Regular, careful maintenance is essential for keeping the safety level and original
performance of the machine unchanged over time.
1.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular
maintenance is essential for safety and performance.
2.
Do not use the equipment with worn or damaged parts, this can be dangerous. Parts are to be
replaced and not repaired. Use genuine spare parts. Parts that are not of the same quality can
damage the equipment and create safety hazards.
3.
Wear strong work gloves when removing and reassembling the blade.
4.
Check the blade’s balance after sharpening.
5.
Check the grass flap and grassbox collector frequently for wear and deterioration.
6.
Whenever the machine is to be handled, transported or tilted you must:
ü
Wear strong working gloves;
ü
Grasp the machine at the points that offer a safe grip, taking account of the blades, the mower’s
weight and its distribution.
BLADE MAINTENANCE
The cutting blade will continue to rotate after the motor is switched off. Slicing is possible if
care is not taken. Wear appropriate hand coverage.
Remove the electric plug from the mains supply. Clean the underside of the deck with a stiff brush,
before any maintenance is undertaken to the blade.
Instruction Manual