19
Ford Focus / Focus C-MAX / Focus CC
Fastening for underride protection
Vehicle-dependent, if present.
1
M6x25 bolt in existing 7 mm dia. hole
3
10 mm shim
2
Pin lock
Premount-
ing heater
Installing heater
Only for 1.4 lt; 1.6 lt; 1.8 lt engine
Transport heater to installation location and
connect wiring harness as shown.
Installing
heater
Use holes in bracket as shown.
Check position of all components and adjust
if necessary. Check that they have freedom of
movement.
1
M10x30 bolt with locking toothing [2x]
Installing
heater
Use hole in strut as shown.
Check position of all components and adjust
if necessary. Check that they have freedom of
movement.
1
M8 flanged nut (premounted)
3
Flanged nut
2
Strut
Tighten Ejot screw (10 Nm).
Mounting
heater
33
1
3
2
34
35
1
1
36
2
1
3