Webasto Thermo Pro 90, Установка оборудования

Страница: 53 / 55

Thermo Pro 90
11 Wiring diagrams
1112
11.16 Legend to wiring diagrams
Item Description Remarks
A1 Heater Thermo Pro 90 / Thermo Pro 90 HDD
A2 Control unit –
ATS Exhaust gas temperature sensor PT2000
B4 Room thermostat Optional
BA Operating indicator Light 0.15 W to max 2 W
BM Burner motor Combustion air fan
DP Fuel pump Fuel pump for heater
F1 Fuse 20A
Blade fuse DIN 72581-3 F2 Fuse 1 A
F3 Fuse 20 A
FZG Vehicle blower –
GS Glow plug –
H1 Symbol on display –
H2 LED
(green, blue, white, red) Operating indicator, ready indicator,
ON indicator, fault list
H5 Bulb/LED ON indicator, pumping device (max. 500 mA)
K5 Relay with free-wheeling diode Vehicle blower
P MultiControl / SmartControl (W-bus)
P1 SmartControl (W-bus)
S4 Switch On/Off (min. 500 mA)
S5 Switch Auxiliary drive / pumping device
S6 Switch, 1 or 2-pin ADR
S7 Battery disconnector Electronically controlled disconnector (max. 500 mA)
S10 Electronic battery disconnect switch –
ÜHS Overheating protection Sensor on heat exchanger
UP Coolant pump U4840 coolant pump
V1 / V2 Diode Min. 500 mA (optional, not included in wiring harness)
WTS Coolant temperature sensor Coolant temperature in coolant circuit
X1 4-pin plug connection Item BM to item A2
X2
2-pin plug connection
Item GS to item A2
X3 Item DP to item A2
X4 Item UP to item A2
X5 Item WTS to item A2
X6 Item ATS to item A2
X7 Item ÜHS to item A2
X8 12-pin plug connection Vehicle-specific wiring harness