Webasto Sprinter Vancouver Standard, Руководство пользователя

Страница: 29 / 32

29
Sprinter
Initial Start
4
4
A/C System:
24. Insulate the low-pressure A/C hose with insulating hose (8) as needed.
b
25. Using anti-condensation tape (19), wrap the TXV valve.
b
26. Using P-clips (44, 40, 32, 33), cable ties and self-tapping screws, secure the hoses and wiring to prevent
chaffing or damage.
4
Recharge the vehicle per the manufacturer’s procedures using the chart below.
4
27. Install the 10 amp fuse in the fuse holders.
28. Start the engine. Test the A/C system for functionality and performance.
4
29. Reinstall all interior panels and components that were removed unless otherwise instructed in this manual.
4
30. Place the new refrigerant label (20) on the radiator core support.
XXX
31. Using two black self-tapping screws (41), install the diffuser (3) on the front of the Vancouver unit.
4
NOTE: This step is optional.
32. Install the Vancouver cover as needed (2).
It is recommended to register your product at
http://www.techwebasto.com/serial/index.php
.
Item
Number
Part Number Description Quantity
8 5011556A INSULATION HOSE ID 0.875IN X 6FT LONG 1
19 5013253A ANTI-CONDENSATION TAPE As Needed
44 21499 TUBE CLAMP As Needed
40 5011487 SCREW SELF-DIRLLING - 0.25 X 1 in. As Needed
32 5001085A CABLE TIE - HEAVY DUTY BLACK As needed
33 620406Z CABLE TIE 11 IN.- BLACK As needed
20 5011928 LABEL - REFRIGERANT 1
41 5011593 SCREW 4.2 X 16MM SELF-DRILLING - BLACK 2
3 6290321660B DIFFUSER 1
2 62U003AA093 AIR DUCT END PIECE 1
Item Type Quantity
Lubricant Manufacturer’s specification 4 additional ounces
Refrigerant Manufacturer’s specification 3.2 lbs.