
Mazda 3 MPS
1311472A
3
Heater Unit / Installation Kit
Recommended heater unit for the relevant vehicle class:
The choice of heater unit is based on the size of the vehicle passenger compartment and the
customer's comfort requirements.
Foreword
These installation instructions apply to Mazda vehicles with 3 MPS Gasoline – validity, see page 2 –
from model year 2006 and later, assuming technical modifications to the vehicle do not affect
installation, any liability claims excluded. Depending on the vehicle version and equipment,
modifications may be necessary during installation with respect to these installation instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the
Thermo Top C/P/E
are to be observed in any event.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.
General Instructions
Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and cable harnesses to original vehicle lines and cable
harnesses using cable clips.
Sharp edges should be fitted with edge protectors (split open plastic hose).
Spray unfinished body areas, such as bore holes, with anti-corrosion wax (Tectyl 100K, Order no.
111329).
Special Tools
- Torque spanner for 2.0 - 10 Nm
- Vice-grip wrench
- Riveting nut tool
Amount
Description
Order no.:
1
Commercial supply of required control
See price list
1
Installation kit for Mazda 3 MPS Gasoline
1,311,467A
Vehicle
Heater unit
Compact car
Thermo Top E
Mid-class, station wagon
Thermo Top C
Luxury, van, off-roader
Thermo Top P