Webasto D5W Z Скачать руководство пользователя страница 1

Water heater

D5W Z heater

Legend for Figure 1

1 Blade-type fuse holder and blower relay
2 Digital timer
3 Heater
4 Diode group

1

2

1

4

3

Upgrade
D5W Z heater to auxiliary 
heating system C

FORD Galaxy

TDI (pump injection)

from model year 2001

All equipment variants

Valid for left-hand drive models only

See page 2 for validity details

An auxiliary ventilation function is only possible 
(even with Telestart) if the summer/winter 
switch is used.

IMPORTANT!
Danger warning:
The incorrect installation or repair of Webasto heating and cooling systems may cause a fire or 
the escape or fatal carbon monoxide. This may result in serious or fatal injuries.
Special company training, technical documentation, special tools and special equipment are 
required for the installation and repair of Webasto heating and cooling systems.
NEVER attempt to install or repair Webasto heating or cooling systems unless you have 
completed the company training and thus acquired the required technical skills and unless you 
have the technical documentation, tools and equipment available to you that are required for 
completing proper installation and repair work.
ALWAYS follow all Webasto installation and repair manuals and observe all the warnings.
Webasto cannot accept any liability for defects and damage caused by the system being 
installed by untrained personnel.

Ident. No. 90 106 58B

Cover charge 10.00 Euros

© Webasto AG

Содержание D5W Z

















Отзывы: