5
BlueSky
7 Reset Procedure
3
3
There is a minimum of 20 A available.
X
X
Press and hold close button.
The roof closes as far as possible.
X
X
Release close button.
X
X
Press and hold close button.
After approx. 10 seconds roof slides with small steps
until it is completely closed.
Motor produces a loud click sound.
X
X
Release close button.
The system has been reset.
6 Troubleshooting
Symptom
Possible causes
Solution
Poor opening of the
roof
Pollution of rubber
seal.
X
X
Clean seal with
mild detergent
Poor sliding of the
roof
Lack of grease on
the rails and guides
X
X
Clean and apply
grea se to inside of
rails and guides
Roof does not slide
smoothly after
cleaning and greas-
ing
X
X
Contact supplier
Roof does not open
/ close
No Power
X
X
Check battery
Broken fuse
X
X
Replace fuse
Roof does not close
Motor does not op-
erate properly
X
X
Close roof manu-
ally by turning
driving shaft of
motor using the
emergency key
X
X
Reset roof
Fig. 03: Emergency key in position for turning driving shaft
CAUTION
Uncontrolled rotation of emergency keys
around its own axis causing damage
Risk of injury and/or damage of components.
X
X
Do not operate roof electrically with the switch
during manual ope ration using emergency key(s).
ATTENTION
Motor does not respond as expected
Improper functioning of roof.
X
X
Reset control system after operating roof
manually.
X
X
Read chapter “Reset procedure”.
