● The machine will automatically enter the ALS2 mode.
● Lower hood to spin
● After the spin, rotate the wheel to the inner position shown on the display. The
machine’s laser will turn on and you will add the weight at 6 o’clock to the inside
of the wheel. It is important to split the weight amount between the laser. In this
case, the weight called for is 1.50 oz, so we placed 0.75 oz on each side of the
laser (see images below).
● Rotate the wheel to the outer position shown on the display. The machine’s laser
will turn on and you will add the weight at 6 o’clock to the outside of the wheel. In
this case, the weight called for is 1.00 oz, so we placed 0.50 oz on each side of
the laser (see images below).
● Lower hood to spin
● After the spin, the display should show 0.00 in the inner and outer window when
the wheel is balanced (see image below).
2
