weaverleathersupply.com
800-932-8371
7
FF
H
H
II
JJ
K
K
G
G
LL
M
M
Figure 7
Figure 9
Figure 8
Figure 10
3) Run through Top Thread Eyelet
(F)
.
(Figure 7)
4) Run thread through top of Needle Bar
(G)
and through Top Hole in Side Plate
(H)
.
(Figure 8)
5) Run thread through Check Spring
(I)
, the Bottom Thread Guide
(J)
and the Top Thread
Guide
(K)
located on the side plate.
(Figure 9)
6) Run thread through the bottom of your Needle Bar
(L)
and your Needle
(M)
.
(Figure 10)
FILLING BOBBINS
Figure 11
Figure 12
A bobbin winder is included that may be attached to an electric drill to assist you in winding
bobbins if desired.
We accept no liability for any injury or damage incurred through the
use of this method.
TO USE THE BOBBIN WINDER
1) Bring the thread from the spool through the split end of the bobbin winder, then place the
bobbin on the bobbin winder.
(Figure 11)
2) With a light tension on the thread, turn the drill over slowly and allow the bobbin to wind
evenly.
(Figure 12)
