humidity. Sensor error display --% on receiver.
5) Low voltage indication with flash icon show on receiver.
6) Max/Min value of temperature and humidity show on receiver.
7) 3 channel transmission.(factory setting or users can stir the switch on battery compartment
by selves)
6.2 Operation
1.When the sensor powered up, it will enters into transmission mode after all LCD segments
light up for about 2 seconds
2.The sensor will transmit weather data every 10s while enter into normal learning mode.
3.Low voltage indication: view once when power-on,then one time every hour.
4.All transmission data will setting and show on receiver’s LCD.
6.3 POWPER SUPPLY
1
、
2*1.5V AAA alkaline batteries
6.4 ASSEMBLY SKETCH
1. Take down the bottom case from the transmitter base station,using PA3*16mm screw and
ABS sleeve fix the bottom case in the place you wanted.
2. Detach the two PM3*8mm screw off the battery cover and install batteries, then mount one
PM3*8mm screw in the battery cover to fix in base station
