9.0 Dual Time Mode - Dual Time and
Setting the Dual Time
Dual Time Mode
!
The Watch includes a function to show the
time of a second time zone - Dual Time
Mode.
!
The second digit of the dual time synchronizes
with the Current Time.
To Set the Dual Time
!
To select the setting display, hold the [M] button
for 2 seconds in the
Dual Time Mode and the
flashing "
SET
" icon will appear.
!
In the
setting display, press the [M] button to
change the selection between minute and hour.
!
When the digits are flashing (selected), press the
[S/S] / [L/R] button to increase / decrease the
number. (Hold down the button
to change the
number at a higher speed).
!
When the setting is completed, press and hold
the [M] button to exit the setting display.
Increase/ decrease
the number
Increase/decrease
the number at
a higher speed
hold [S/S] / [L/R]
[S/S] / [L/R]
hold
[M]
digits have been
selected (flashing)
Setting Display
minute
hour
hold
[M]
[M]
[M]
Dual Time Mode
8.2 Pacer Mode -
Link with Chronograph
How to use the Pacer with
the Chronograph
!
When the Pacer Mode is ON: Press the [M] button to
select
the Chronograph Mode.
!
Press the [S/S] button to start the counting and
beeping at the same time.
!
When the Chronograph is counting and the watch is
beeping, pressing the [S/S] button stops the beeping
sound and chronograph simultaneously.
Pacer Mode
Chronograph
Stops Counting
Display
Chronograph
Counting Display
. .
.
beep-beep
beep-beep
[M]
[M]
10.0 Altimeter Mode -
Temperature and History Display
Functional Display
!
The Watch includes two Altimeter functional
displays: Temperature and History Displays.
!
One of the two functional displays will appear in
the top row of the display. The current (history)
altitude and the current (history) time are shown in
the middle row and bottom row of the display
respectively.
History Display
!
T h e W a t c h r e c o r d s t h e a l t i t u d e r e a d i n g s
automatically on the hour, i.e 1:00, 2:00, 3:00 and
etc. These data will be
used
to plot an altitude
record graph.
!
In the
History Display, the altitude graph is shown
in the top row of the display.
!
To review the altitude records of the last 23 hours,
press the [L/R] button to move
the cursor
to
the
left cyclically, then the respective altitude record
and its recording time (flashing) will appear on the
display following the adjacent diagram.
Temperature Display
!
In
Temperature Display, the top display shows
the current temperature in degree Celsius ( C) or
degree Fahrenheit ( F).
IMPORTANT:
If you want to have an accurate reading
of air temperature, you must take
off the watch from
the wrist that prevents body temperature effect on
your watch.
the
°
°
A LT I
[L/R]
[S/S]
[S/S]
[L/R]
[L/R]
[L/R]
- 23
hour
current
time
History Display
(Current Time)
History Display
(1st Record at the hour)
flashing
A LT I
cursor moving
direction
flashing cursor
(1st record
at the hour)
current
altitude
current time
Temperature Display
Altimeter Mode
Altitude
History Review
A LT I
current
temperature
History Display
(-2 to -23 hour)
10.1 Altimeter Mode -
Unit Selection and Altimeter Adjustment
How to Switch between Units
!
The Watch can display altitude in meter (m) or
feet (ft) and temperature in degree Celsius ( C)
or degree Fahrenheit ( F).
!
To switch among different units, hold the [S/S]
button to change the unit following the adjacent
unit selection sequence.
NOTE:
The Watch includes an automatic Sea Level
Pressure comparison feature, this smart feature
prevents fluctuation altitude readings from being
recorded when staying at the same altitude.
°
°
Altimeter Adjustment
!
There are 4 kinds of adjustment methods:
the Zero
Altitude, Absolute Altitude, Sea Level Pressure and
Factory Default Adjustment.
!
Zero Altitude: Adjust the
altitude mandatorily
to
zero for relative altitude measurement. If the
altimeter is adjusted by Zero Adjustment, the
indicator "
r
" will appear on the display.
!
Absolute Altitude: Set the
altitude to
a known
value and it can
be recalled for
the next setting.
!
Sea Level Pressure: Input a specific sea level
pressure obtained
from an
official site.
!
Factory Default: Restore the Watch to
the default
factory setting (1013.2mb) which
is assumed
to
be the Sea Level Pressure.
NOTE
: Altitude is calibrated independently of each
mode. For example, if the
absolute altitude is
selected, the
effect of
previously
set sea level
pressure will be ignored.
Zero Altitude Display
Absolute Altitude Display
Factory Default Display
Sea Level Pressure Display
Adjustment Displays
A L
I
T
SET
A L
I
T
SET
A L
I
T
SET
A L
I
T
Unit Selection Sequence
hold
[S/S]
hold
[S/S]
hold
[S/S]
hold
[S/S]
°
C (Celsius)
m (Meter)
°
C (Celsius)
ft (Feet)
°
F(Fahrenheit)
ft (Feet)
°
F (Fahrenheit)
m (Meter)
[S/S]
SET
