Weatherdock raspAIS, Руководство по эксплуатации

Страница: 14 / 21

Page 14 of 21
After installing a chart, plug your USB stick into the
computer
Step 2. Start your RaspAIS
Insert all cables, note that the power connection is
plugged in at last.
Step 3. Start OpenCPN (if not already open)
Step 4. Press Settings
Step 5. Press Charts
Step 6: Press Add Directory and then the file path where
you saved the chart.
Step 7: Press Open
Step 8. Press on the map and then on Apply
Step 9. Press Ok.
.
Now the chart would have to be loaded as shown in the
picture below.
After that the card is permanently installed. The USB
stick must always remain in the same USB port otherwise
the card will no longer be recognized and the process
must be repeated.