Page 20 of 36
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 37 66 38 30 www.weatherdock.de
With an AIS receiver (e. g. easyAIS) connected to a
chart plotter or laptop with navigational software
you can check the transmission of the easyRESCUE.
Normally the chart plotter or navigational
software shows a ship symbol or a circle on the
display. The information of the unit ID (9
characters) starting with “970.....“ is shown
together with the safety related text „SART TEST“.
The test mode can be interrupted earlier by
pressing the button „TEST“ for more than 3
seconds. The LEDs stop flashing and the device
turns off.
If having pressed the TEST button accidentally
instead of the ON button you can switch to the
alert mode by pressing the ON button.
At the end of the regular test before the device is
turned off automatically, the device shows the test
result:
