7
)HDWXUHV'H¿QHG
1 Power Diagnostics
Press the BATTERY LEVEL button to view the charge of the sealed lead acid
battery. The Charge and AC Output indicators show the status of the battery. If the Charge indicator is
red, unit is charging, and if it is green, the unit is fully charged. The AC Output indicator shows when
the AC output is switched on.
2 Air Hose
8VHWKH$LU+RVHWRLQÀDWHDQLQÀDWDEOHREMHFW
3 Flashlight
7KHLQVHWÀDVKOLJKWFDQEHUHPRYHGIURPWKHXQLWE\SUHVVLQJWKH5(/($6(EXWWRQ
4 Torch Power
Press the TORCH button to switch the inset Flashlight on and off.
5 DC Power (12V)
Press the DC power button to enable or disable the DC SOCKET.
6 AC SOCKETS (120V)
Use the
$&962&.(76WRSRZHUH[WHUQDOGHYLFHV7KH$&3RZHUEXWWRQ
must be switched to the on position for the sockets to receive power.
7 AC Power (120V/60Hz)
Press the AC power button to enable or disable the AC SOCKETS.
8 DC IN 12
Use the DC IN jack to charge the unit, using an AC Adapter or DC car charger.
9 Air
Compressor Power
Press the AIR COMPRESSOR power button to turn the air compressor on and
off.
10 LAMP
Toggle the LAMP switch between ALL, ONE, OFF, and EMERGENCY to adjust the lamp’s
light settings. If the switch is set to EMERGENCY and the unit is charging through the DC In, it will
automatically detect a power outage and power on the unit’s lamp.
11 Air Gauge
Use the air gauge to view the pounds per square inch or kilogram per square centimeters of
DLUSUHVVXUHRIDQLQÀDWDEOHREMHFW
12 Triple Fluorescent Lamp
The Triple Fluorescent Lamp can be adjusted to different light settings using
the LAMP toggle switch.
13 LCD Display
View the Time, AM Indicator, PM Indicator, and Radio Frequency through this Liquid
Crystal Display.
14 CLK ADJ/DISPLAY
Press and hold the CLOCK button to set the clock and alarms. Press the DIS-
PLAY button to cycle through the clock, alarm 1, and alarm 2 on the LCD display.
15 FUNCTION
Press the FUNCTION button to cycle through AM, FM, WB (weatherband) radio, or
AUX Input.
16 ALARM 2
Press the ALARM 2 button to activate the alarm to buzzer or radio.
17 ALARM 1
Press the ALARM 1 button to activate the alarm to buzzer or radio.
18 MEM/ALERT
Press the MEM button to save a radio station to the power generators memory. With
the power off, press the ALERT button to activate the alert feature, which sounds an alarm when emer-
gency weather information is being broadcast through the weatherband.
19 SLEEP
3UHVVWKH6/((3EXWWRQWRVHWWKHSRZHUJHQHUDWRUWRJRRIILQPLQXWHV
20 VOLUME
Press + or - on the VOLUME button to increase or decrease the volume.
21 Accessory Compartment
Use the Accessory Compartment to store Air Hose attachments.
