©2015 KNAACK LLC
2
TOOLS REQUIRED
PARTS LIST
(8) 3/8-16 x 1-1/2"
Hex Head Bolt
(8) 3/8-16
Hex Nut
(8) 3/8"
Flat Washer
(8) 3/8"
Lock Washer
(8) 3/8"
Body Washer
(1) 1/4"
Drain Plug
(6) Floor Mounting Spacer
(1) Filler Cap
(1) Filler Cap Neck
ALUMINUM BED UPFIT KIT PARTS LIST - 32-0245
• Pipe Wrench
• Open or Box End Wrench - (2) 9/16"
• Electric Drill
• Bits: 716"
• Pipe Tape
DANGER
Use of flammables in this transfer tank may cause an explosion,
resulting in serious bodily injury, death, or property damage.
To avoid such risk:
DO NOT use this transfer tank to transport, transfer or store
flammables, such as gasoline.
DO NOT use this transfer tank as an auxiliary fuel tank by connecting it
to an existing fuel system.
DO NOT use this transfer tank for fueling aircraft.
DO NOT modify this transfer tank in any way or use it for any purpose
other than its intended use.
DO use this transfer tank only for the transport, transfer or storage of
diesel fuel only.
DO use this transfer tank only in fueling land-based motor vehicles and
equipment.
DO vent this transfer tank at all times to allow for fuel expansion and to
prevent vacuum during fluid or fuel removal.
Note:
This transfer tank does not comply with the following specifications:
• Title 49 of the Code of Federal Regulations for the interstate transfer of flammables, explosives, hazardous materials and hazardous wastes.
• Underwriters’ Laboratories of Canada C142.13 requirements for transportation of flammables and combustible liquids.
These tanks may also be subject to individual state or province regulations, compliance with which is the responsibility of the owner.
Future Tank Removal:
Empty all of the combustible liquid and use all lifting hooks for safe and controlled removal of transfer tank from the vehicle.
Danger of explosion. Do not drill, grind, saw, weld or use a torch on this
product. Doing so could result in serious injury, death or property damage.
(1)
Zinc Rich Primer
(8) 7/16" x 1-1/2"
Plastic Washer
