IFPL4
3
Copyright © 2021 by Wearwell
®
LLC, 199 Threet Industrial Rd, Smyrna, TN 37167 • 800-264-3030 • www.wearwell.com
FOUNDATION
®
PLATFORM
ASSEMBLY INSTRUCTIONS
TO LEARN MORE
VISIT US AT WEARWELL.COM/FOUNDATION
STEP 2
INSTALL THE TILES
Lay out leg/beams end to end and using a power screwdriver, insert the self-tapping screws through the connector plate on each set of beams and secure.
INSERT TILES
AT AN ANGLE
Install the first tile at a 90
° angle pressing it against the lock screw.
Continue with each tile, tapping each with a rubber mallet so that it fits tightly
against the previous. Repeat for additional platforms.
A
A
B
B
STEP 3
OPTIONAL - ANCHOR THE PLATFORM
F1 Beam Anchor Kit
YOU WILL NEED
Place the plate into the beam with approximately 1.5” (4 cm) sticking out. Make a mark on the floor that aligns with the hole in the plate.
Remove plate and with the 3/16” (5 mm) concrete drill bit drill a hole to a depth of 2” (5 cm), making sure to keep the bit perpendicular to the floor.
Vacuum or sweep the debris and replace the plate before screwing the anchor into the hole. Do not overtighten.
