13
value (Left side)* and Set value of the timer (right side).
*Note!
After start running,
DO NOT
press Temperature Up and Down arrow. This will
activate instruments OFFSET function. OFFSET function shall not be activated before
running temperature is reached and stabilized. For further information about OFFSET
function, please refer to OFFSET function section described below.
f.
: Indicator lights for Power, Heating and Set Temp: When power is
turned on, both Power and Set Temp indicators lights up, inform operator to set
desired temperature. When press Start/ Stop button to start heating, the Set Temp
light will be off and Heating light on.
g.
:
℉
* and
℃
lights: Located on the left side of temperature LED display
monitor. Block Heater
’s temperature can be displayed as Centigrade or Fahrenheit.
Simultaneously press temperature up and down key to alternate Centigrade or
Fahrenheit Temperature display.
*Note!
Setting functions are not workable when displayed in Fahrenheit
