4
1) Switch off mains electrical supply.
Installation Procedure
4) Trim mains cable
A
to the desired length and
connect the leads to their respective terminals
at the base of the pole (L = Phase, N = Neutral,
= Earthing)
3) Feed mains cable
A
into column
B
, while
setting luminaire in position by following the
orientation indicator
C
. Tighten set screws
D
.
2) Check that rating shown on luminaire label
conforms with mains electrical supply.
(example)
ZFT444
220-240V/50 Hz, 1-10
115-XXXX SOE
XXXXXXX
LED 4000K 18W item no. XXX
09/19 IP66
L
N
Supply cable
