WE-EF RMM320 LED, Инструкция по установке и обслуживанию

Страница: 4 / 7

3
Installation
The product must be installed and maintained by a
VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW
building/construction and/or electrical regulations and
relevant legislation.
Warning: Switch off mains electrical supply prior to
installing and connecting the luminaire.
Notice: ,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
Installation Procedure
1) Switch off mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) Untighten screws A and remove cover B .
4) Feed mains cable C through bracket D , while matching
it to luminaire E .
5) Tighten two screws F evenly.
6) Move back cover B and tighten all four screws A .
7) Feed mains cable C into column G , while setting
bracket/luminaire assembly in position by following
the orientation indicators M . Tighten all six screws H .
8) Trim mains cable C to the desired length and connect
the leads to their respective terminals at the base of
the pole:
a) ON/OFF or WE-EF Control Advanced (L = Phase,
N = Neutral, = Earthing)
b) WE-EF Control Basic (L = Phase, N = Neutral,
= Earthing, Ls = Switching Phase)
c) 1-10 V/DALI or WE-EF Control Dynamic (L = Phase,
N = Neutral, = Earthing, DA/DA = DALI control
line, D-/D+ = 1-10 V control line).